A little update to the Terz guitar; it's coming along very well, only the frets and logo to go on before lacquering (and a LOT of sanding). To avoid tearing the grain when routing the binding ledges I give the edges of the body a coat of shellac, it also stops glue sticking to the bits of wood where you don't want it.

binding and purfling ledges routed out

Using masking tape to hold purfling in place while the glue dries

Koa binding with a very thin strip of maple to stand it out from the mahogany sides

Ziricote headstock veneer, koa binding with maple and dyed maple purflings, tuners will be Waverleys, fancy!